I often hear this question, but for a different reason,
most people do not understand why I have a knife
or a flashlight is more expensive than 10-15 dollars

All this is only a matter of personal preferences
and conditions of use. I have to cut wires and wooden sticks
from time to time, so I really want the handle to put less
pressure on the hand

Here are some that are constantly in use





I indicated the thickness of the handles.
The most convenient knife for my business it's with fixed blade
and this one, which I did not take pictures (Stanley 199)

From folding knife me it is most convenient Camillus TL-29
and Puma Prince, BUT their axial knots and backlock on the Puma
too weak. When I start to cut something hard and viscous,
I'm afraid to give more strength, since there is a suspicion
that I will damage the construction of the knife...

The most durable are the CQC8 and converted
from a Microtech Socom Delta (red scales),
But the thickness of the handle is a little less
than I want (I will be comfortable about 18-20 mm)
and sharp edges of scales. In fact, this is not a problem,
I can unscrew them and replace them with thicker ones.
The situation with frame locks is quite different, I do not have
the equipment to drill holes in the titanium, made threads
and fit additional scales.

Now I'm looking at Winkler II F-3 Flipper,
He also has a thin handle, but it has a good rounding scales.

Another very proper knife, in terms of convenience and durability
this Strider SJ-75, but because of the closure of the company
they are now more of a collector's thing

p.s.
Carrying grenades in a bag is dangerous in terms of their
inherent danger in the assembled state,
is necessary to transport them in disassembled condition,
but then a lot of time is lost for their assembly